Metal Bandsaw MEBAswing 260 DG-H

The universal helper: clever and easy to operate

Particularly suitable for universal use with different cross-sections, materials and frequently changing mitre cuts. A metal bandsaw machine for straight and mitre cuts, infinitely variable from 45° - 90° - 45° - 30°. Center of rotation unchanged at each angle setting, thus exact length measurement at 90° and in the miter range.

The universally applicable mitre bandsaw machine MEBAswing 260 DG has an optimal price-performance ratio.

The machine control complies with CE standard 89/289.

Specifications:

Basic equipment of the MEBAswing 260 DG-H

1. Manual mitre adjustment from 90° - 30°, infinitely variable according to scale to 0.5° accuracy
2. Mitre pivot point is the intersection between the band saw blade and the material system, which is why no change in the length dimension is created with changing angle position
3. Stops at 30° - 45° - 90° - 45°
4. Fast material tension. At each angle position of the saw frame, the material is clamped parallelly to 90°.
5. Central machine operation
6. Cutting pressure reduction due to dead weight of the heavy, torsion-resistant cast saw frame and fine adjustment depending on the material cross-section via hydraulic damping cylinder and weight compensation spring
7. Material stop with scale up to 500 mm
8. Bandsaw drive with final shutdown
9. Infinitely variable clamping jaw adjustment with eccentric clamping
10. Movable belt guide arm, adjustment to material width
11. Bandsaw diverter roller carbide guide
12. Driven chip brush
13. Mechanical bandsaw tension
14. Instruction manual and spare parts list on CD-ROM
15. MEBA bimetal band saw blade 4/6 ZpZ mounted on machine
16. Complete coolant device with electric submersible pump
17. Paint finish silver grey/ blue grey (RAL 7001/ RAL 7031)
18. Hydraulic lifting of the saw frame with shut-off valve

Technical changes reserved.

Information on the exact delivery time can be found in the order confirmation.